We are proud to be the UK exclusive distributor for the Exotic Car Gear range of carbon fibre parts for the entire McLaren range. Carbon fibre parts are all about development and using the best quality materials and those from Exotic Car Gear are the finest in the World, the quality is OEM level and the fit 100% perfect on every application all backed by a complete after care service second to none. We are the exclusive UK retailer for all the McLaren range for all the models but are also able to supply any non Mclaren model you may require.

Side Turning Vanes

McLaren Mp4-12C Side Turning Vanes. This item is produced as a replacement part and will install in the same manner as the OEM part without modification.

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£2,799.00

Call 01280 850 102

Mclaren 650S style Side Door Blades

Enhance the look of for MP4-12C or 650s with a pair of side door blades. Designed as a self adhered trim component no modification to the exterior body is required. This purchase includes the right and left side Door Blades and the required updated splash guard trim for installation.

OEM fitment and quality. This was created as a replacement part requiring no modifications. Fits McLaren 650S 2014+ and MP4-12C 2011+.

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£1,599

Call 01280 850 102

Rear Hatch Panel Vent Covers

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£1,500

Call 01280 850 102

Front Hood / Bonnet

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£7,400

Call 01280 850 102

Rear Engine Lid for Coupe

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£4,600

Call 01280 850 102

Front Fender Sheilds OEM

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£3,500

Call 01280 850 102

Rear Hatch Panel Frame (with Vents)

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£2,900

Call 01280 850 102

Wiper Cowl Trim

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£1,800

Call 01280 850 102

12C / 650S Right & Left Front Door Shields

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£2,250

Call 01280 850 102

Front Lip Spoiler

A direct replacement for the standard lip spoiler, indistinguishable from OEM in every way including weave, laquer and importantly quality - genuine A1 manufacturer acceptance. Mounts to vehicle using all OEM mounting points. Allow two hours to fit, call for full fitting instructions.

£2,799.00

Call 01280 850 102

12C Front Lower Bumper Shield

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£1,425

Call 01280 850 102

OEM Style Air Brake / Rear Spoiler

OEM fitment and quality. This was created as a replacement part requiring no modifications. Fits McLaren 650S 2014+ and MP4-12C 2011+.

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£2,699.00

Call 01280 850 102

Top Center Engine Cover, Intake Panel

McLaren MP4-12C Top center Engine Cover, Intake panel. This item is produced as a replacement part and will install in the same manner as the OEM part without modification.

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£499.00

Call 01280 850 102

Tailpipe Finishers (select. Colours)

McLaren MP4-12C tailpipe finishers, in Carbon Fibre. This item is produced as a replacement part and will install in the same manner as the OEM part without modification.

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

Available in:

  • Plain Carbon
  • Silver / Black
  • Lava-Red / Black
  • Orange / Black
  • Matte Black

£900.00

Call 01280 850 102

Rear Exhaust Panel Vent "Armadillo"

McLaren MP4-12C rear exhaust vent, in Carbon Fibre. This item is produced as a replacement part and will install in the same manner as the OEM part without modification.

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£ Call

Call 01280 850 102

Right & Left Engine Bay Sheilds

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£2,890

Call 01280 850 102

Coolant Tank OEM

Produced in the exact matching factory 2×2 (3k Twill Weave) Pre peg Toray Dry Carbon Fiber under the same processes McLaren uses for its original parts. This item is constructed as replacement part and is designed to install in the factory location with no need for modification.

£2,890

Call 01280 850 102

Upgrades

Remapping, Exhausts, Intakes

Carbon Fibre

Composite & Carbon Fibre Parts

Maintenance

Servicing & Maintenance

FaceBook

Follow us on FaceBook

Twitter

Follow us on Twitter

News

Trackdays & Events